- “A number from 1 to 24 is the delay start, not an error”
- “Hd is the machine heating water before it will wash”
- “The latch has to close a switch before anything runs”
Symptom
Electrolux dishwasher will not start
Two of this maker's three dishwasher codes are not problems at all, and both of them present exactly like a machine that will not start. A number between 1 and 24 counting down is the delay option. Hd or HO is the heat delay, waiting for the water to reach temperature. Between them they account for a real share of the no-start calls we take, and both are free to resolve from this page.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
Three ordinary causes
What this usually turns out to be
Cheapest and commonest first, which is also the order we check them in. They sit hundreds of dollars apart, and only the unit settles which one is yours.
-
The delay start is running
One press of cancel drops it. Two cancels the cycle and drains; three shuts the machine down. Knowing the presses do different things is what stops people getting nowhere.
Dishwasher door and latch repair from $125 -
The machine is waiting for hot water
One to two minutes for every degree of rise is the maker's own arithmetic. From a cold line that is genuinely half an hour.
Dishwasher drying and heat repair from $145 -
The door latch is not closing its switch
A door that feels shut and is not gives a no-start with no other symptom at all.
Dishwasher door and latch repair from $125
In five minutes
Before you call anybody
None of it needs tools, and all of it makes the visit shorter.
-
01
Read the number before assuming it is a code
Between 1 and 24 and counting down by the hour is the delay and nothing else.
-
02
Press the door and retry
Starting when held is the latch, and no board is involved.
-
03
Run the kitchen tap hot first
It removes most of an Hd delay before it begins.
How it shows up
What people describe when they call
A shortcut
Narrow it down before anybody arrives
A description of the behaviour leaves a few possible causes. A code names the subsystem before anybody opens anything, which is why it is worth photographing before it clears.
If there is no code at all
On a dishwasher, the data plate is on the edge of the door — open it and look along the top or the side. All models
In more detail
About Electrolux dishwasher will not start
What to do in the next ten minutes
Read the display. If it shows a number between 1 and 24 counting down hourly, press cancel once — that is the delay start. If it shows Hd or HO it is heating water and it will start on its own. Otherwise press the door firmly closed and try again.
Two of three codes are modes
It is unusual and it is worth stating plainly: this maker publishes three dishwasher codes and only one of them, i40, reports something wrong. The other two describe the machine doing exactly what it was asked to do. We would rather you found that here than paid for a visit to be told it, which is why this page leads with the display rather than with the mechanism.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about Electrolux dishwasher will not start
It used to start immediately and now it waits.
Check whether a delay option has been left selected — they persist between cycles on some models. Otherwise a longer Hd delay usually means the water reaching the machine is colder, which is plumbing rather than appliance.
Nothing lights up at all.
That is different and it is not on this page. No display at all is power, the door switch circuit, or the control — and it is worth booking rather than troubleshooting.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name