Service
Electrolux dryer heating element replacement
When the element is genuinely open, replacing it is straightforward work — and the part of this job that matters is what is done alongside it. An element rarely fails for no reason: restricted airflow makes it cycle hot, and a thermal fuse or a thermostat that went at the same time is the machine's record of that. Fitting the element and leaving the duct blocked is how the same repair comes back inside a year.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
Before you read on
What this job costs and how it is agreed
A starting figure, not a quote. What moves it is the model, how the unit is built in and which part it needs — settled after the on-site diagnostic.
Starts at
from $165
After a diagnostic from $95, which comes off the bill when you go ahead.
or call (305) 912-9018
Diagnostic
From $95, credited to the repair
The price
In writing, before anything is opened
Warranty
On the labor we performed
On the visit
How this visit actually goes
The same order every time, so nothing is opened and nothing is charged before you have seen the figure and said yes.
-
01
Confirm continuity cold before ordering
An element that tests open cold is the part. One that tests fine is not, and the failure is the thermostat or the supply.
-
02
Replace the thermal fuse and thermostats with it
They are inexpensive, they sit in the same airstream, and they have had exactly the same life as the element that failed.
-
03
Clear the duct before the machine goes back
The element cycled hot because the air was restricted. Nothing else in this repair matters if that stays true.
Applies to
The Electrolux units we carry this work out on
-
Eleven dryers · gas and electric Electrolux dryer repair in Miami
Eleven dryers — the largest single family in this maker's whole US line, bigger than every refrigerator, range and dishwasher it sells put together. Electric and gas at each of the 300, 400, 500, 600 and 700 Series, all at 8.0 cubic feet, plus a 24-inch compact at 4.0. Four more machines are laundry towers, where the washer and dryer are one unit. This badge also publishes a dryer error code guide, which its mass-market sister does not publish at all — seven rows, and three of them send you back to the installer rather than to a repair company.
- Eleven dryers plus four towers — the deepest family in the line
- A published seven-row code guide, which the sister badge does not have
- EF1 is airflow, and in a condominium that is the vent run rather than the machine
In more detail
About Electrolux dryer heating element replacement
An element rarely fails for no reason
Restricted airflow makes it cycle hot, and it goes eventually. That is why the part of this job that matters is what gets done alongside it: the thermostats and the thermal fuse sitting in the same airstream have had exactly the same life, and the duct that made it run hot is still doing so. Fitting the element and leaving the run blocked is how the same repair comes back inside a year and gets blamed on the part.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about Electrolux dryer heating element replacement
Do you replace the thermostats every time?
On a machine of any age, yes, and they are inexpensive. Doing one part in a set of three that have aged together is a second visit's labor spent for nothing.
Will you clear the vent as part of it?
We clear what we can reach and tell you plainly when the rest needs the building's own people. Putting the machine back against a blocked run is not finishing the job.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name