Error code
Dryer signal Mute
Electrolux dryer — reported by blinking lights rather than by a code. The end-of-cycle chime is switched off.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Signal Mute, from the manufacturer's own documentation
This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it.
The signal
Mute
The end-of-cycle chime is switched off. The maker lists it among its codes, and we keep it there, because the complaint it answers is a real one: a dryer that no longer tells anybody it has finished leaves a load sitting and creasing, and the owner reasonably assumes something has failed. Nothing has. There is a mute setting, it is easy to hit while wiping a panel, and some models light an icon to say so. On a machine tucked into a closet at the other end of an apartment, the chime is most of the interface.
or call (305) 912-9018
What it narrows down to
The unit has no sounds or alarm chimes. The unit may be in mute mode and user must unmute the unit. Some units will have an illuminated mute icon, indicating Mute has been activated.
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the dryers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Door Open. Check to make sure door is not blocked and is fully closed.
Humidity Sensor Failed. Your dryer will complete the current cycle and you can still operate manual cycles. If error code continues, schedule service.
Ventilation Blockage. Check lint filter (blocked/lint). Check the exhaust tube for bends, restrictions and blocks. Check vent exit for any blockage. Clean and clear any debris in the way. This is a known installation issue, please contact your installer.
Incorrect wiring. This is a known installation issue, please contact your installer.
Power Supply Issue. Contact Electric Company.
Auto Dry Setting.
The same digits mean different things on different equipment. Search the full code list
In more detail
About Dryer signal Mute
What the appliance is actually reporting
The end-of-cycle chime is switched off. The maker lists it among its codes, and we keep it there, because the complaint it answers is a real one: a dryer that no longer tells anybody it has finished leaves a load sitting and creasing, and the owner reasonably assumes something has failed. Nothing has. There is a mute setting, it is easy to hit while wiping a panel, and some models light an icon to say so. On a machine tucked into a closet at the other end of an apartment, the chime is most of the interface.
Where this appears, and why not to clear it
On the appliance's own display, as a short single code — a letter and a number, or two letters. Nothing alternates and nothing arrives in halves on this make, so what the panel shows is the whole of it. Photograph it before you cut the power. This maker's own answer to most of these is thirty seconds at the breaker, and that is worth following once — but a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again.
What to do about it
- Look for a mute or speaker icon on the panel. If it is lit, that is the whole answer.
- Track the mute setting down in the book that came with the dryer. It usually shares a button with something else and wants a hold rather than a tap.
- Unmute and run a short cycle to confirm the chime is back.
- If there is no mute icon and no chime, and the panel is otherwise normal, the sounder itself has failed — which is cosmetic, and worth mentioning only if we are visiting anyway.
Where this goes next
The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 912-9018 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards