---
title: "Convertible drawer not holding"
description: "Electrolux convertible drawer not holding — the drawer this maker calls TempAdapt runs from −6 °F to 45 °F, which is a wider span than any other compartment…"
url: "https://electroluxmiami.support/symptoms/convertible-drawer-not-holding-temperature/"
date_modified: "2026-09-11"
Appliance type: "Refrigerators"
---


# Electrolux convertible drawer not holding

### What to do in the next ten minutes

Set the drawer to its coldest and leave it four hours with a thermometer in it, then do the same at its warmest. Which end it fails at is the diagnosis. Check the drawer closes fully and that nothing inside is holding it open at the back.

### Why this is not a whole-cabinet problem

It is worth saying clearly because people reasonably assume otherwise: a compartment that can be set to anything from below zero to cellar temperature has to control its own air, and that means hardware the rest of the cabinet does not have. When that hardware fails, nothing else in the refrigerator is affected and nothing else needs touching. It is one of the more satisfying repairs on this badge — a specific part, a specific symptom, and a feature the owner actually chose the cabinet for.

The damper is stiff or obstructed

A drawer that reaches its warmer settings and not its coldest is being starved of air, and the damper is what meters it.

The sensor is reading wrong at one end

A thermistor that is accurate at 38°F can be useless at 0°F, which is precisely where this compartment is interesting.

The drawer is not sealing

It is a drawer as well as a compartment. Runners out of true or a seal that has hardened means it can never hold its lower range.

Test both ends of the range

Coldest and warmest, four hours each. Failing at one end only is the most useful result you can get.

Watch the drawer close

Push it home and see whether it stops short. A gap at the back is invisible from the front.

Confirm the rest of the cabinet is normal

If the fridge and freezer are holding, this is genuinely the drawer and nothing more.

The drawer will not reach what you set it to

What it usually means

It has its own damper and sensor, so it fails on its own

Reaching some settings and not others points at the damper

A drawer that will not close fully will never hold its lower settings

What to do in the next ten minutes

Set the drawer to its coldest and leave it four hours with a thermometer in it, then do the same at its warmest. Which end it fails at is the diagnosis. Check the drawer closes fully and that nothing inside is holding it open at the back.

Why this is not a whole-cabinet problem

It is worth saying clearly because people reasonably assume otherwise: a compartment that can be set to anything from below zero to cellar temperature has to control its own air, and that means hardware the rest of the cabinet does not have. When that hardware fails, nothing else in the refrigerator is affected and nothing else needs touching. It is one of the more satisfying repairs on this badge — a specific part, a specific symptom, and a feature the owner actually chose the cabinet for.

### Can I just use it as a normal drawer?

Yes, and many people do for years before mentioning it. But it is a repairable part, and if the drawer is why you bought the cabinet it is worth putting right.

### It works in winter and not in summer.

That points at the cabinet struggling overall rather than at the drawer, and it is worth checking the condenser and the air path before anything in the drawer is opened.

---

**[Read full article: Convertible drawer not holding](https://electroluxmiami.support/symptoms/convertible-drawer-not-holding-temperature/)**